Kicker kit: 1x Front kicker, 2x Screw, SHCS M6 x 1 x 8

Cable management clip kit: 2x Cable management clips, 2x M4 x 8 socket screw with patch, 2x M4 round base weld nut

Pull cable kit: 1x Pull cable, 1x Handle bottom, 1x Handle top, 1x Barrel, pull cable, 2x Set screw, M4.0 x 0.7 x 6

Stabilizer, rubber foot: 1x Foot, stabilizer

HDI Nose cone transducer: Traditional 200 kHz High Chirp, 83 kHz Medium Chirp and DownScan 455 kHz, 800 kHz

Cable tie/heat shrink kit: 6x Cable tie anchored, 12x Cable tie small, 2x Heat shrink tubing 1.5”

Upper clamp kit: 1x Collar, plain, upper, 1x Collar threaded, upper, 2x Screw, M4x25 mm, hex, socket, SS316

Steering motor thermocouple kit: 1x Cable assembly thermistor 150 mm, 1x Thermocouple adhesive, 1x PCBA thermal pad

Thermal pad, steering motor: 1x Motor thermal pad

Tensioning bolt kit: 1x Screw, M5x20 mm, hex, socket, SS316, 1x Seal, adjusting screw, O-ring

Steering motor kit: 1x Motor assembly, 1x Motor thermal pad, 1x PCBA thermal pad, 1x Screw, M5x20 mm, hex, socket, SS316, 1x Seal, adjusting screw, O-ring, 4x Screw, M3 x 10, torx, 1x Motor belt

Head sensor assy: 1x Sensor assembly, 2x Screw, M3 x 10, torx

1x Idler, gear, pully, assembly

1x Indicator pulley assembly

1x Indicator belt

1x Motor belt

12x Screw, M3 x 20, torx

Gear cover kit: 1x Cover, gear drive, 8x Screw, M3 x 18, hex, 1x Cable tie/heat shrink kit.

Thermal spreader kit, 1x Spreader, thermal, 1x Thermal pad, 3x Screw, M3 x 10, torx

GPS PCBA 1x PCB Test Assembely: 2x Screw, torx, no. 6 x 3/8, 1x GPS PCBA cable (not shown in the illustration)

Lowrance label 1x Head decal

Housing hardware 14x Screw, torx, no. 6 x 3/4

Indicator assembly 1x Indicator w/magnet, 1x Indicator ring

Lower bezel kit: 1x Bezel, lower, 2x Screw, M3 x 10, torx