B&G Zeus³S-12 and Halo20+ Radar kit. The B&G Zeus³S-12 is an easy-to-use chartplotter navigation system for blue water cruisers and regatta racers, incorporating a 12-inch touchscreen display, high-performance electronics, and a wide range of functionalit

NSS9 evo3S and Halo20+ Radar bundle. NSS9 evo3S Includes World Basemap.

Gasket for 40/40 HV Display 5-pack

Gasket for H5000 Graphic/Race Displays 5-pack

PUMP-5: 24V DC: Reversible hydraulic gear pump. 3.0L (183 cui) / min. For cylinder displacement of 290 - 960 cc (17.7 - 58.5 cu. in.). O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings. SteadySteer compatible. (NAC-3 / AC42 required).

PUMP-4: 12V DC: Reversible hydraulic gear pump. 3.0L (183 cui) / min. For cylinder displacement of 290 - 960 cc (17.7 - 58.5 cu. in.). O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings. SteadySteer compatible. (NAC-3 / AC42 required).

B&G Zeus³S-16 is an easy-to-use chartplotter navigation system for blue water cruisers and regatta racers, incorporating a 16-inch touchscreen display, high-performance electronics, and a wide range of functionality designed specifically for sailors. Worl

B&G Zeus³S-12 is an easy-to-use chartplotter navigation system for blue water cruisers and regatta racers, incorporating a 12-inch touchscreen display, high-performance electronics, and a wide range of functionality designed specifically for sailors. Worl

NSS12 evo3S is an all-in-one MFD, with built-in dual channel CHIRP sonar, GPS and WIFI. Support for chart options, Radars, Autopilot, Instrumentation and much more.

NSX 3007 - Smart Chartplotter / fishfinder. Active Imaging™ 3-in-1 transducer. No Chart. 7-inch SolarMAX™ high definition display, Built-in 1 kW echosounder, GPS, and WIFI. A next-generation C-MAP® DISCOVER™ X or REVEAL X™ chart card is required.

Battery power cable kit: 1x Power cable, 2x Screw, M5 x 10 mm, hex

Pivot pin: 1x Pivot pin, pedal

Driving gear kit: 1x Driving gear, pedal, 2x Screw, no. 6x3/4, torx, pan, SS

Momentary switch kit: 1x Momentary switch, pedal, 2x Screw, M3x18mm, hex, button, 304SS, 1x Screw, no. 6x3/8, Phillips, pan, SS, 2x Cable tie, anchored, 2x Nylock SS nut M3, 1x Momentary button, pedal, 1x Spring, compression, 7mm ID x 15mm x 1m, 1x Moment

Lower extrusion kit, GHOST 47": 1x Lower extrusion, with bushing, GHOST 47"

Latch trigger kit, GHOST 47": 2x Latch trigger, GHOST 47"

Secondary latch kit: 1x Secondary latch, 1x Spring, secondary latch torsion, 2x Washer, 1/2", nylon, 1x C-ring, 1/2", 15-7 PH SS, 1x Pull cable spacer

Lift assist spring kit, GHOST 47": 1x Gas spring, compression/traction, GHOST 47", 2x Binding barrel, 5/16 x 1”, Pan, PH, SS, 2x Screw, 1/4-20 x 5/16”, Pan, PH, SS

Wear bearing kit, GHOST 47": 2x Wear bearing, GHOST 47"

Shaft seal: 1x Seal, shaft

1x Idler, gear, pully, assembly

1x Indicator pulley assembly

Thermal spreader kit, 1x Spreader, thermal, 1x Thermal pad, 3x Screw, M3 x 10, torx

PCBA, main head kit: 1x PCB TST ASY head controller CC, 1x Thermal pad, 6x Screw, torx, no. 6 x 3/8, 1x Screw, M3 x 10, torx