Connects older 7 pin blue plug transducers to displays with 9pin transducer ports.

AP44 Autopilot Controller - Compact and easy to use, the AP44 is your main control panel for the Autopilot. Rotary dial and key function buttons gives you what you need to steer the vessel in a compact unit.

OP12 Autopilot Controller - Autopilot Remote keypad with intuitive keys for course change and Standby/AUTO modes. Integrates seemlessly with NAC-2 and NAC-3 based Autopilot systems.

IS42 Instrument - This multi-purpose instrument display features a colour screen that’s designed for optimal visibility in all conditions. See wind data, boat speed, depth, engine information, autopilot status, AIS data and more at a glance.

S5100 High-performance CHIRP sonar module. Three fully independent channels able to deliver high-resolution sonar coverage across multiple depth ranges, precision-focused for offshore sportfishing anglers.

Transducer Extension Cables for StructureScan® 3D - 10ft (3m)

SUNCOVER: ELITE-5 TI

SUNCOVER: ELITE-7 TI

S2016 & R3016 Suncover

Compacte draadloze afstandsbediening voor Simrad stuurautomaten.

Network power isolator. Separates separately powered sections of the NMEA2000 network while letting data through.

Airmar IDST800L 235F B-122-RETR 6M

Airmar 110WX/ 120WX Cable 6 m (19.6 ft) (NMEA 2000 to Device cable)

H5000 ANALOGUE DEPTH 200M

SonarHub Module, with power cable and Ethernet cable 4.5m (15ft). Requires adapter 000-12571-001 or 000-13977-001 adapter cable to use Airmar Non-Chirp or Chirp 9-pin transducers.

10/10HV display for H5000 or Triton systems.

Mark/Elite Tallon Mounting kit

CZONE™ Network Bridge Interface - Designed to isolate sections of the NMEA 2000 network to decrease standby current draw. Can be used for Isolation when bridging between two CAN networks.

NMEA 2000 Micro-C Auto pilot network starter kit: Includes Network power cable, 4.5 m (15 ft) N2K cable, 3 x T-connectors, and 2 x network terminators.

35 m (115 ft) NMEA2000 Wind vane cable (Micro-C male - Simnet)

20 m (66 ft) NMEA2000 Wind vane cable (Micro-C male - Simnet)

HS70 Programming Cable

NMEA2000 Cable with 90-degree connectors on both ends. For use on instruments mounted in tight spaces etc where normal cables run too deep behind the unit.

AC70 spare PCB assembly. Also option for Voith Schneider propeller control. To be mounted in AC85 Autopilot Computer Cabinet for IMO approved Voith Schneider pilot.