FLUSH MOUNT KIT: ELITE FS 9

SUNCOVER: ELITE-9 FS

SUNCOVER: ELITE-7 FS

ActiveTarget Transom Mount Kit (Not included in the ActiveTarget Kit)

HALO 300X: 130W Pulse Compression Radar System. Comes with HALO 130W Pedestal, RI-50 Power Supply and 20 m (65.5 ft) Cable. NO ANTENNA!

HALO 200X: 50W Pulse Compression Radar System. Comes with HALO 50W Pedestal, RI-50 Power Supply and 20 m (65.5 ft) Cable. NO ANTENNA!

HALO 2006: 50W Pulse Compression Radar System. Comes with HALO 50W Pedestal, 6ft Antenna, RI-50 Power Supply and 20 m (65.5 ft) Cable.

HALO 2004: 50W Pulse Compression Radar System. Comes with HALO 50W Pedestal, 4ft Antenna, RI-50 Power Supply and 20 m (65.5 ft) Cable.

Naviop OP-BOX Programmable 1GHz

SteadySteer™ Flow Switch Only. Enjoy increased convenience without sacrificing safety with SteadySteer - a new functionality for autopilot systems that enables immediate, manual control of a vessel through turns without disengaging the autopilot.

Simrad R2009 HALO20+ kit is a dedicated 9" portrait Radar Control Unit and HALO20+ Pulse Compression Radar. Kit includes R2009 radar control unit, HALO20+ Radome and Interconnection cable 20m (66 ft).

ELITE FS 7 with No Transducer (ROW) The new Elite™ Fishing System (FS) gives you access to the full line-up of Lowrance fishfinding tools – including ActiveTarget™ live sonar, Active Imaging™, FishReveal™ and preloaded C-MAP® Contour™ + charts – all at a

ELITE FS 7 with Active Imaging 3-in-1 Transducer (ROW) The new Elite™ Fishing System (FS) gives you access to the full line-up of Lowrance fishfinding tools – including ActiveTarget™ live sonar, Active Imaging™, FishReveal™ and preloaded C-MAP® Contour™ +

Surface mount kit for HS75 Antenna. Contains bracket to mount to compass, + 2 surface brackets. One mount for cables passing down through the mounting surface, and a taller version for feeding the cable out the side of the mount.

Side plate kit, GHOST 52”/GHOST 60”: 1x Cover mount RH, GHOST 52”/GHOST 60” 1x Cover mount LH, GHOST 52”/GHOST 60” 6x Screw, SHCS M4 x 0.7 x14, SS

Lower extrusion kit, GHOST 52”/GHOST 60”:1x Lower extrusion, with bushing, , GHOST 52”/GHOST 60”

Wear bearing kit, GHOST 52”/GHOST 60”: 2x Wear bearing, GHOST 52”/GHOST 60”

Lift assist kit, GHOST 52”/GHOST 60”: 1x Gas spring, compression/traction, GHOST 52”/60”, 2x Binding barrel, 5/16 x 1”, Pan, PH, SS, 2x Screw, 1/4-20 x 5/16”, Pan, PH, SS

Latch trigger, GHOST 52”/GHOST 60” 2x Latch trigger, GHOST 52”/GHOST 60”

1x Column, inner shaft, 60"

1x Column, inner shaft, 52"

1x Cable, head to pedal, GHOST GHOST 52”, 2x Screw, M3 x 10, torx, 1x Seal, strain relief, 1x Cable tie/heat shrink kit, 1x PCBA thermal pad

1x Cable, head to pedal, GHOST 52”, 2x Screw, M3 x 10, torx, 1x Seal, strain relief, 1x Cable tie/heat shrink kit, 1x PCBA thermal pad

DDS Module - 4x 12-Pin Cables. For Initial prototyping or low-volume custom boatbuilders.