H3000 Analogue Bezel (Black)

Vertical Masthead Unit Ocean Spec 1450mm Only. Analog Wind Sensor for WPT3, H3000 and H5000.

B175H-W (20°) - Bronze 1kW High-Wide-CHIRP Through Hull Depth/Temperature Transducer. 9pin connector and 1.8m (6ft) cable.

B60 (20°) - Bronze 600 W Through-Hull 50/200 kHz Depth/Temperature Sonar Transducer. Black 9pin connector and 1.8m (6ft) cable. Boatbuilder only.

Flush mount bracket for ActiveImaging™ HD transducers

Ghost Active Imaging HD 3-in-1 Nosecone

PUMP-X Motor Brushes - Autopilot pump brush kit for PUMP-2,3,4 & 5. 2Pcs. Note: Not for Pump-1

HALO 2000 & 3000 Power and Ethernet Cable - 10 m (33 ft)

1x Lower housing assy with outer column, GHOST 52”, 1x Cable tie/heat shrink kit (not shown in the illustration), 2x Screw, M3 x 10, torx, 1x PCBA thermal pad

GHOST 47" MOUNT ASSEMBLY KIT

Required for connecting Simrad NAC-D Autopilot Computer to Volvo EVC and IPS drives. Compatible with EV2 Can be used with SGO5 Pilot Computer

GHOST Trolling motor compass extension cable, 6 m (20')

HOOK Reveal 9, nine-inch display with TripleShot transducer, makes fishing easier, delivering powerful performance with proven fish-finding tools including, Autotuning Sonar, SideScan and DownScan Imaging™, improved deep water performance and now FishReve

HOOK Reveal 7, seven-inch display with 83/200 HDI CHIRP transducer, makes fishing easier, delivering powerful performance with proven fish-finding tools including, Autotuning Sonar, DownScan Imaging™, improved deep water performance and now FishReveal. Wo

PUMP-3: 12V DC: Reversible hydraulic gear pump. 1.6L (98 cu.in) / min. For cylinder displacement of 160-550 cc (9.8 - 33.5 cu.in). O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings. SteadySteer compatible. (NAC-3 / AC42 required).

HDI Nose cone transducer: Traditional 200 kHz High Chirp, 83 kHz Medium Chirp and DownScan 455 kHz, 800 kHz

Wind vane assembly spare for WS300/700 series wind sensors. Inc. mounting nut.

HDS-9 LIVE Bezel and SD Card Door

B285M - Bronze 1kW Through Hull Medium-Chirp Depth and Temperature transducer. 9-pin connector and 10m cable.

Enables re-use of the existing BR24/3G/4G cable onboard when upgrading to a HALO Dome radar.

ActiveImaging™ 2-IN-1 Transducer - Provides Active Imaging technology for SideScan and DownScan while leaving you free to select other transducer options for for Traditional/Chirp Sonar. 7.6m (25 ft) cable with 9 pin connector.

80m (262') mast cable with pre-molded connectors for the WS310 and WS700 series wired wind sensors.

20m (65’) mast cable with pre-molded connectors for the WS310 and WS700 series wired wind sensors.

StructureScan 3D Through-Hull Transducer with Low and High CHIRP in one transducer. 7.6 m (25ft) cable. Requires StructureScan® 3D Module sold separately.