HDS-16 LIVE Bezel and SD Card Door

HALO24 Radar - A 24'' powerful 25W Solid-State Radar, delivering 60RPM at short range and up to 48nm range. Identify hazards in an instant with VelocityTrack™ Doppler technology and can run dual scale to identify hazards long and far.

B&G V60 fixed-mount DSC VHF Radio - Stay safe and connected with this VHF marine radio featuring a sleek design with removable fist mic, Class D DSC functionality, and built-in GPS.

50m (164') mast cable with pre-molded connectors for the WS310 and WS700 series wired wind sensors.

35m (115’) mast cable with pre-molded connectors for the WS310 and WS700 series wired wind sensors.

20m (65’) mast cable with pre-molded connectors for the WS310 and WS700 series wired wind sensors.

WS740S Ocean Spec Vertical Wind Sensor Only (1800mm)

WS720 Vertical Wind Sensor Only (1050mm)

WS310 Wired Wind Sensor only.

WS320 Wireless Wind Sensor only.

WS310 Wired Interface. Converts NMEA 0183 wind data from the Masthead Unit to NMEA 2000®.

The WS320 Wireless Interface: Spare Wireless Interface for the WS320 Wind Sensor system. Receives wireless signals from the WS320 and converts to NMEA 2000.

WS730 (1450mm) Vertical Wind Sensor Pack. Comes with 35m mast cable and junction box.

WS720 (1050mm) Vertical Wind Sensor Pack: Comes with 35m mast cable and junction box

WS710 (0.8m) Vertical Wind Sensor Pack: Comes with 35m mast cable and junction box.

WS310 Wired Wind Sensor with 20m (65.5ft) mast cable and interface for connection to the NMEA 2000® network.

NMEA 2000 Micro-C Medium duty cable. 20 m (65.6 ft) Low loss 18-gauge cable recommended for network backbone runs resulting in a more robust network. Cables are identified by orange locking collars.

NMEA 2000 Micro-C Medium duty cable. 10 m (33 ft) Low loss 18 gauge cable recommended for network backbone runs

NMEA 2000 Micro-C Medium duty cable. 6 m (19.7 ft) Low loss 18 gauge cable recommended for network backbone runs

NMEA 2000 Micro-C Medium duty cable. 2 m (6.5 ft) Low loss 18 gauge cable recommended for network backbone runs

SERVICE PACK FOR SIMNET TERMINATOR

B&G Vulcan 7R 7-inch chartplotter and radar display with global basemap

NAIS500/400 & Naviop OP-BOX Power & Serial Cable

IS42 & Triton2 Installation Kit - Includes edge bezel, screws and guide tool.