B&G Zeus³S-12 is an easy-to-use chartplotter navigation system for blue water cruisers and regatta racers, incorporating a 12-inch touchscreen display, high-performance electronics, and a wide range of functionality designed specifically for sailors. Worl

NSS16 evo3S is an all-in-one MFD, with built-in dual channel CHIRP sonar, GPS and WIFI. Support for chart options, Radars, Autopilot, Instrumentation and much more.

NSS9 evo3S is an all-in-one MFD, with built-in dual channel CHIRP sonar, GPS and WIFI. Support for chart options, Radars, Autopilot, Instrumentation and much more.

Lower unit front cap kit: 1x Front cap, 1x O-ring, 80x3 mm, 4x Screw, M3, 5x10 1x Screw, M5x8, 1x Seal washer, 5x9x1

Lower unit rotor assembly: 1x Rotor assembly

In-Line 120-Ohm NMEA2000 terminator, to use in one end of the network.

NSX 3009 - Smart Chartplotter / fishfinder. HDI Skimmer med/high 455/800 kHz transducer. No Chart. 9-inch SolarMAX™ high definition display, Built-in 1 kW echosounder, GPS, and WIFI. A next-generation C-MAP® DISCOVER™ X or REVEAL X™ chart card is required

NSX 3012 - Smart Chartplotter / fishfinder. Active Imaging™ 3-in-1 transducer. No Chart. 12-inch SolarMAX™ high definition display, Built-in 1 kW echosounder, GPS, and WIFI. A next-generation C-MAP® DISCOVER™ X or REVEAL X™ chart card is required.

NSX 3007 - Smart Chartplotter / fishfinder. Active Imaging™ 3-in-1 transducer. No Chart. 7-inch SolarMAX™ high definition display, Built-in 1 kW echosounder, GPS, and WIFI. A next-generation C-MAP® DISCOVER™ X or REVEAL X™ chart card is required.

SONAR ADAPTER CABLE 9P MINI TO 9P

Replacement trolling motor compass (TMC-1)

Miscellaneous hardware kit for GHOST Trolling motor foot pedal

Battery power cable kit: 1x Power cable, 2x Screw, M5 x 10 mm, hex

Pedal, upper: 1x Upper, pedal

Pivot pin: 1x Pivot pin, pedal

Driving gear kit: 1x Driving gear, pedal, 2x Screw, no. 6x3/4, torx, pan, SS

Center cover kit: 1x Center cover, pedal, 1x Screw, no. 6x3/8, Phillips, pan, SS

Switch housing kit: 1x Switch housing, pedal, 2x Screw, no. 6x3/8, Phillips, pan, SS

Potentiometer kit: 1x Potentiometer, pedal, 1x Lock washer, 3/8", internal tooth, SS, 1x Nut, 3/8-32, SS, 1x Screw, no. 6x3/8, Phillips, pan, SS (not shown in the illustration), 2x Cable tie, anchored (not shown in the illustration)

Speed knob kit: 1x Speed knob, pedal: 1x Spring, Compression, speed knob, 1x E-clip 3/4”, 1x D-clip, 1/4” shaft

Bluetooth module kit: 4x Screw 7mm torx T8, 1x Screw, no. 6x3/8, Phillips, pan, SS, 2x Cable tie, anchored, 1x Bluetooth seal, pedal, 1x Bluetooth cover, pedal, 1x Bluetooth cable grommet, pedal, 1x PCB TST assembly Bluetooth

Momentary switch kit: 1x Momentary switch, pedal, 2x Screw, M3x18mm, hex, button, 304SS, 1x Screw, no. 6x3/8, Phillips, pan, SS, 2x Cable tie, anchored, 2x Nylock SS nut M3, 1x Momentary button, pedal, 1x Spring, compression, 7mm ID x 15mm x 1m, 1x Moment

GHOST foot pedal Configurable button 2 kit. 1 x Back left button assembly, pedal, 1x Spring, compression, 7mm ID x 15mm x 1m.

GHOST foot pedal anchor button kit (front right button): Kit contains 1 x front right "Anchor" button assembly, 1x Spring, compression, 7mm ID x 15mm x 1m