HALO20 Radar - A cost-effective compact 20'' Radar dome. 24nm range and 24RPM. The perfect radar solution for budget-conscious sailers with smaller vessels.

NAC-2 Spare Drive Cable - 2m (6.5 ft)

Hook2 Transducer Y-Cable Allows an Active Imaging 2 in 1 or LSS-2 and HST-WSBL to be connected to a Hook2 TripleShot Display.

TotalScan™ Through-Hull Transducer with Medium/High Chirp and 455/800kHz Down and SideScan.

NAIS-500 Class B AIS including NSPL500 VHF/AIS Antenna splitter and GPS500 antenna. Broadcast your location to anyone nearby with an AIS Receiver. A low cost safety system for recreational vessels and smaller professional vessels in near coastal waters.

IS42 & Triton2 Installation Kit - Includes edge bezel, screws and guide tool.

SS60 (20°) - Stainless Steel 600 W Through-Hull 50/200 kHz Depth/Temperature Sonar Transducer. Black 9pin connector and 10m (33ft) cable.

SS175L - Stainless Steel 1kW Low-CHIRP Through Hull Depth/Temperature Transducer. 9pin connector and 10m (33ft) cable.

Networked wind sensor for Triton2, Triton, IS42, IS40 and IS20 systems. Sensor only, does not include cable.

Triton² Pilot Controller. This intuitive keypad can be combined with a B&G Triton² Display to create a fully-featured autopilot controller.

Triton² Digital Display - Multi-purpose 4.1 inch colour sailing instrument and autopilot display.

Edge Bezel for P2005, I3005, GO5 & Vulcan-5

H5000 Pilot Controller Edge Cover Set

HDS-12 GEN3 BEZEL & DOOR PK ASY

H5000 CPU UNLOCK CODE HYDRA TO HERC

H5000 Audible Alarm Module provides a configurable audible alarm connected anywhere on the network.

TILLER BOLT FOR T1/T2 BLACK RAMS

HDMI monitor video cable 3 m (9.8 ft)

10/10HV display for H5000 or Triton systems.

The ZG100 GPS Antenna with Integrated Compass sensor providing Heading, Heel and Trim.

CZONE™ Network Bridge Interface - Designed to isolate sections of the NMEA 2000 network to decrease standby current draw. Can be used for Isolation when bridging between two CAN networks.

NMEA 2000 Micro-C Auto pilot network starter kit: Includes Network power cable, 4.5 m (15 ft) N2K cable, 3 x T-connectors, and 2 x network terminators.

20 m (66 ft) NMEA2000 Wind vane cable (Micro-C male - Simnet)

NF80/FU80/QS80 bulkhead Mounting Kit